LOKI – TESLA DIAGNOSTIKOS Įranga

4,500.00

LOKI – TESLA DIAGNOSTIKOS Įranga dirba su Tesla Model S, Model X, Model 3 and Model Y.

Pakuote sudaro:

1 x Scanner LOKI
1 x LC001-CS – Cable CAN for Tesla Model S
1 x LC002-LS – Cable LAN for Tesla Model S/X
1 x LC003-CX – Cable CAN for Tesla Model SR, Model X
1 x LC004-L3 – Cable LAN for Tesla Model 3
1 x LC006-C3 – Cable for Tesla Model 3, Model Y

Būsena: Užsakoma
Pristatymo laikas: 4-7 darbo dienos

Produkto kodas: DIA0000428 Kategorija: Žymos: , , ,

Aprašymas

Loki scanner features:

  • Diagnostics Model S/X/3/Y on any version of firmware.
  • New firmware installation.
  • Installation of the navigation.
  • Edit all configuration options for Model S/X Tegra/Intel before firmware 2020.48, change unprotected settings after 2020.48.
  • Editing unprotected Model 3/Y configuration settings. LOKI can edit unprotected configuration settings without brazing to Model 3 with firmware up to 2021.4.12 (Editing secured configuration is presented separately).
  • Self-test of car blocks.
  • View live data on the CAN bus.
  • Password deactivation (Valet/Glovebox PIN/PIN To Drive). For Intel-based auto firmware after 2021.4.12, this feature is available via online features.
  • Factory/Diagnostic/Developer Mode activation (For Intel car Firmware 2021.4.12, for later firmware activation of Service Mode via online features).
  • Binding control units after their replacement.
  • Calibration of radar for AP2.5 3.0.
  • Calibration and adaptation of vehicle systems.
  • Deleting of crash for Delphi SDM (Model S 2012-2018), Bosh RCM V1 (M3, MX до 2019).
  • Deleting of crash from TAS.
  • Binding of Model S keys.
  • 00000000000Online functions (reading alerts and configurations, switching SIM card, password reset regardless of the firmware version, reset/reinstall firmware and more (features depend on the firmware version).

DATA SHEET

Supply voltage (DC) : from 5 to 12 V (vehicle on-board grid) or power supply unit with function «Quick Charge 2.0» (Input 100-240V 50/60 Hz; Output 9V-2A)
Power consumption, no more than, kW : 60
Dimensions (L×W×H), mm : 238×160×70
Weight (scanner Loki), kg : 0.42
Weight (set), kg : 1.3
Laptop (computer) communication interface : USB 2.0
Tesla diagnostic models : Model S/X/3/Y with any firmware
Internet connection : RJ45 (Ethernet)
Connecting peripherals : 2 x USB 2.0
Software update : Yes (Free of charge)