VAG K+CAN COMMANDER 3.6 diagnostic and programming device

50.00

VAG K+CAN COMMANDER 3.6 – The most advanced version of VAG K+CAN Commander for newer CAN based VAG cars. This is a professional DIAGNOSTIC TOOL including CODE READER for all VAG cars using CAN protocol. With this tool you can connect to any “Electronic Control Unit” in modern cars (CAN BASED). You can Read and Clear Trouble Codes in any control module. Also you can perform Adaptations and Coding or you can see Measured Values and device identification numbers.

Package contains:

1 x VAG K+CAN COMMANDER 3.6 device
1 x Software

Warehouse: In stock
LT/LV/EE Delivery time: 1-3 working days
Europe Delivery time: 7-10 working days
International Delivery time: 10-12 working days
Express Delivery time: 1-3 working days

Description

Operating systems: Windows 98, Windows 2000, Windows XP, Windows Vista, Windows 7

Supported protocols:

CAN High Speed Transport Protocol 2.0 (CAN TP 2.0)
CAN Low Speed Transport Protocol 2.0
CAN High Speed Transport Protocol 1.6
CAN Low Speed Transport Protocol 1.6
K-Line (KW2000 and KW1281)

STANDARD DIAGNOSTIC FUNCTIONS (works only through CAN protocol):

  • READING and CLEARING Diagnostic Trouble Codes (DTCs) from any Electronic Control Module in your car. Few examples of covered modules: Engine, Airbags, Automatic Transmission, Central Electronics, ABS Brakes, ESP, Power Steering, Immobilizer, Instruments, CAN Gateway, Central Convenience, Radio.
  • Finding Device Identification Numbers (for example: HW Number, SW number, Extended Identification Number, Coding Number, Part Number).
  • Viewing Measured Values from any module supporting that function.
  • Performing Adaptations in any module supporting that function.
  • Coding of any Electronic Module supporting that function.

Special functions:

  • Odometer correction in Instrument Clusters and EDC15x.
  • TV-Activation function for MMI based vehicles (Audi A8, Audi A6, and Audi Q7).
  • Diagnostic addresses from 0x01 to 0x80 virtually cover all Electronic Control Units in VAG vehicles. This can allow you to investigate and diagnose some new units which stay untouchable for other diagnostic tools.
  • Manual definition of running diagnostic session – not like other diagnostic tools always standard diagnostic session 0x89.
  • Broadcast diagnostic requests: enabling or disabling normal communication of all devices, Clearing All DTC’s, entering into transport mode.
  • Reading Security Access Code and Login WFS.
  • Reading and programming Immobilizer data.
  • Reading and writing EEPROM from Instrument Clusters and Immobilizer.
  • Reading and writing EEPROM of Engine Control Units: BOSCH VAG-EDC15x, VAG-ME7.1.1, VAG-ME7.1, VAG-ME7.5, VAG-Cartronic ME7.8, Porsche 911 (996/997), Porsche Boxter, Porsche Cayman, Porsche Cayenne.
  • Easy Key learning (no need of security code).
  • Custom memory reading and writing from ECUs: EDC16U1, EDC16U31, EDC16CP34, EDC16C4, EDC16U1, MED9.5.1.
  • Custom memory reading and writing from EZS Kessy and Kessy K (without authorization).
  • Clearing Crash Data in some airbag units.

Odometer correct CAN based car:

VW Golf5
VW Jetta (MY2006)
VW Caddy
VW Crossgolf
VW Touaran
VW EOS
VW Individual
VW Passat platform B6 (MY2006)
Seat Toledo (CAN)
Seat Leon (CAN)
Seat Altea
Seat Altea XL
Skoda Octavia II
Skoda Scout
Audi A3
Audi A8
Audi A6
Audi Q7
Audi Allroad 2004+

Security code reading (CAN) / Read/Write EEPROM memory:

VW Golf5
VW Jetta (MY2006)
VW Caddy
VW Crossgolf
VW Touaran
VW EOS
VW Individual
VW Passat platform B6 (MY2006)
Seat Toledo (CAN)
Seat Leon (CAN)
Seat Altea
Seat Altea XL
Skoda Octavia II
Skoda Scout
Audi A3
Audi A8 – R/W EEPROM
Audi Q7
Audi Allroad
Audi A6

K-line – Odometer correct / Security code reading / Read/Write EEPROM:

Audi A2 (K)
Audi A3 VDO/M73 up to 2003 (K)
Audi A4 VDO/M73 (K)
Audi A4 BOSCH (K) up to 2002
Audi A6 VDO (K)
Audi Allroad (K) up to 2004
Audi A8 up to Jan 1999
Audi TT (K)
Seat Alhambra (K)
Seat Arosa (K)
Seat Cordoba after 1999 (K)
Seat Ibiza VDO after 1999 (K) (MY2007 covered)
Seat Leon (K)
Seat Toledo (K)
Skoda Octavia (K)
Skoda Superb (K)
Skoda Roomster (K) (MY2007 covered)
Sko bia (K) (MY2007 covered)
VW Bora (K)
VW Beetle (K)
VW Golf4 VDO/Motometer/BOSCH (K)
VW Jetta (K)
VW Passat (K)
VW Polo VDO/Motometer (K) (MY2007 covered)
VW Sharan (K)
VW T4/T5 VDO (K) (MY2007 covered)

Read/Write EEPROM of Engine Control Units:

  • BOSCH VAG-EDC15x, VAG-ME7.1.1, VAG-ME7.1, VAG-ME7.5, VAG-Cartronic ME7.8. (extracting security code, odometer correction, enable disable immobilizer and s.o.);
  • Porsche 911 (996/997), Porsche Boxter, Porsche Cayman, Porsche Cayenne – Read EEPROM via OBDII;
  • BOSCH VAG-EDC15x, VAG-ME7.1.1, VAG-ME7.1, VAG-ME7.5, VAG-Cartronic ME7.8, MED9x – FSI, EDC16x – Read flashmemory by OBDII (near update programming of flash memories with function for resetting of reflashing counter).

Key learning function (without need of secutity access code/login):

Audi A2
Audi A3 VDO/M73 up to 2003
Audi A4 VDO/M73 up to 2000
Audi A4 after 2000 – petrol engines >= 1.8
Audi A6 VDO (K)
Audi A6 (CAN) petrol engines
Audi Allroad (K) up to 2004
Audi Allroad (CAN) petrol engines
Audi A8 up to 1998
Audi A8 from 2001 to 2002 2.5TDI
Audi A8 (CAN) 2003+ – first component protection generation
Audi TT (K)
Audi Q7 petrol engines
Seat Altea (CAN)
Seat Cordoba after 1999 (K)
Seat Ibiza (VDO) after 1999 (K)
Seat Leon (K+CAN)
Seat Toledo (K+CAN)
Skoda Octavia
Skoda Octavia II (CAN)
Skoda Superb
Skoda Roomster
Skoda Scout (CAN)
Sko bia
VW Phaeton petrol
VW Touareg petrol
VW Bora
VW Beetle
VW Caddy (CAN)
VW EOS (CAN)
VW Golf4 VDO/Motometer
VW Golf5 VDO
VW Crossgolf (CAN)
VW Individual (CAN)
VW Jetta (K+CAN)
VW Passat B5 (K) B6(CAN)
VW Polo5
VW Sharan after year 2000
VW T5
VW Touaran VDO (CAN)
Porsche Cayenne (K)
Key learning Cayenne (CAN)
VAG MMI TV Activation – A6,A8,Q7
Audi VW PORSCHE VAG K+CAN COMMANDER 3.0 VAG DIAGNOSTIC TOOL CABLE